|VSDs vary the speed of motors by varying the frequency of supply to the motor. They can be supplied for single or three-phase motors.
|The SRS reversing switch is specifically for use with the HV-230AE and HV-300AE single-phase Stylvent window fans. It can only control one fan at a time.
|The SSC silent speed controllers have been developed to overcome the electronic hum, which can be experienced when using electronic speed controllers with single-phase motors. They provide two speeds, full speed and between 50-70% of full speed and can on
|Designed to suit the Mixvent range of fans.
|Designed to remotely switch the Ezifit In-Wall Exhaust Fan between high, medium and low speed.
|The SD1-S star/delta switch is designed for use with three-phase star/delta motors. It provides a speed change of approximately 1.3:1.
This unit does not provide any protection for the motor.
|The VA range is an electronic type speed controller providing infinite control of speed-controllable single-phase motors. They can be used to control more than one fan at a time from full speed down to approximately 30% of full speed.
|The AVA5.0 controller will vary the speed of single phase motors in response to DC input signals.
|The EC Speed controller is specially developed for stepless speed adjustment of EC fans that accept a 0-10V control signal.
|The TC3 range of auto-transformer speed-controllers are of a 5-step design and vary the speed from 100% down to approximately 30% of full speed.
|Computer server rooms, switch rooms and commercial kitchens where the accumulation of hot
air needs to be extracted.
|Designed to manage a mini-network of Gorilla X high volume, low speed EC fans.
|9cm LCD touchscreen display with plastic enclosure