Performance Curve - TD-EVO-125VAR

Description

The TD EVO VAR in-line fan has been designed to provide highly efficient, mixed-flow performance with low energy consumption for domestic and commercial applications. It takes advantage of an integrated variable speed controller that can be adjusted locally on the fan, or remotely via a 0-10V or 4-20mA analogue input signal.

The TD EVO VAR also comes standard with an on-board, adjustable 1 to 30 minute run-on-timer that allows steam and odour to be exhausted after leaving the room.

There are 6 models in the range matching standard duct sizes from 100 to 315mm diameter.

Features

l Speed controllable via on-board potentiometer or external
0-10V or 4-20mA signal
Optimised impeller, guide vanes, and outlet diffuser for low
noise operation
Main fan body is easily removed without dismantling ducting
Highly efficient single-phase AC motor
Fan can be mounted in any position
Junction box can be rotated to any position
Integrated run-on-timer (0, 1, 5,15 and 30 minutes)

Construction
Casings manufactured from reinforced, injection moulded, polypropylene plastic. Impellers are made of injection moulded plastic and are a mixed-flow design.

Motors
Type – Single-speed, squirrel cage induction motor
Electricity supply – 220-240V,
single-phase, 50/60Hz
Bearings - sealed for life, ball
Integrated variable speed controller that can be adjusted locally on the fan, or remotely via a 0-10V or 4-20mA analogue input signal On-board, adjustable 1 to 30 minute run-on-timer
Class F Insulation, IP44

Internal Thermal Protection
Manual-reset thermal overload protection device in accordance with mandatory requirements for in-duct fans AS/NZS60335-2-80:2016.

Testing
Air flow tested to ISO5801:Part1, 1997
Noise tested to ISO 13347-3 2004

Suggested Specification

The In-line fans shall be of the TD EVO VAR Series as supplied by Fantech Pty. Ltd.
Impellers shall be of mixed-flow design and driven by single-phase motors with thermal overload protection.
Fans shall include integrated variable speed controller that can be adjusted locally on the fan, or remotely via a 0-10V or 4-20mA analogue input signal. It will come standard with an on-board, adjustable 1 to 30 minute run-on-timer.
They shall include an integral mounting foot and the fan body able to be removed without disturbing connecting ductwork. All models shall be fully tested to ISO5801: Part1, 1997 for air flow and ISO 13347-3 2004 for noise.

Technical Data - TD-EVO-125VAR

Speed [rps]	Avg. dBA @ 3m	kWatts (Input)	Amps	Max.°C	Approx. Weight [kg]
39	36	0.029	0.1	60	1.8

Sound Data

Type	63	125	250	500	1K	2K	4K	8K
Inlet	50	43	56	55	52	47	42	31
Outlet	50	46	57	54	55	46	39	28
Breakout	46	34	40	37	44	40	33	23

Dimensions

A	B	C	D	E	F	G	H
302	191	221	123	29	117	132	100

*All dimensions in mm, unless otherwise stated

Ancillaries

RSK125 Backdraft Damper	MCA-350/125 Backdraft Damper	FC12 Fast Clamps	FGR125 Filter Units	MRJ-350/125 Inlet Grille
ILG125 Ceiling Grille	DUCT125-6M Flexible Duct	EC Controllers	EPFL125 Fixed Louvre Grille