Performance Curve - TD-EVO-150VAR

Description

The TD EVO VAR in-line fan has been designed to provide highly efficient, mixed-flow performance with low energy consumption for domestic and commercial applications. It takes advantage of an integrated variable speed controller that can be adjusted locally on the fan, or remotely via a 0-10V or 4-20mA analogue input signal.

The TD EVO VAR also comes standard with an on-board, adjustable 1 to 30 minute run-on-timer that allows steam and odour to be exhausted after leaving the room.

There are 6 models in the range matching standard duct sizes from 100 to 315mm diameter.

Features

l Speed controllable via on-board potentiometer or external
0-10V or 4-20mA signal
Optimised impeller, guide vanes, and outlet diffuser for low
noise operation
Main fan body is easily removed without dismantling ducting
Highly efficient single-phase AC motor
Fan can be mounted in any position
Junction box can be rotated to any position
Integrated run-on-timer (0, 1, 5,15 and 30 minutes)

Construction
Casings manufactured from reinforced, injection moulded, polypropylene plastic. Impellers are made of injection moulded plastic and are a mixed-flow design.

Motors
Type – Single-speed, squirrel cage induction motor
Electricity supply – 220-240V,
single-phase, 50/60Hz
Bearings - sealed for life, ball
Integrated variable speed controller that can be adjusted locally on the fan, or remotely via a 0-10V or 4-20mA analogue input signal On-board, adjustable 1 to 30 minute run-on-timer
Class F Insulation, IP44

Internal Thermal Protection
Manual-reset thermal overload protection device in accordance with mandatory requirements for in-duct fans AS/NZS60335-2-80:2016.

Testing
Air flow tested to ISO5801:Part1, 1997
Noise tested to ISO 13347-3 2004

Suggested Specification

The In-line fans shall be of the TD EVO VAR Series as supplied by Fantech Pty. Ltd.
Impellers shall be of mixed-flow design and driven by single-phase motors with thermal overload protection.
Fans shall include integrated variable speed controller that can be adjusted locally on the fan, or remotely via a 0-10V or 4-20mA analogue input signal. It will come standard with an on-board, adjustable 1 to 30 minute run-on-timer.
They shall include an integral mounting foot and the fan body able to be removed without disturbing connecting ductwork. All models shall be fully tested to ISO5801: Part1, 1997 for air flow and ISO 13347-3 2004 for noise.

Technical Data - TD-EVO-150VAR

Speed [rps]	Avg. dBA @ 3m	kWatts (Input)	Amps	Max.°C	Approx. Weight [kg]
44	44	0.045	0.2	60	3

Sound Data

Type	63	125	250	500	1K	2K	4K	8K
Inlet	61	52	60	59	60	60	53	43
Outlet	58	52	60	60	62	59	53	43
Breakout	61	45	45	40	47	49	38	29

Dimensions

A	B	C	D	E	F	G	H
326	221	240	147	25	126	165	120

*All dimensions in mm, unless otherwise stated

Ancillaries

RSK150 Backdraft Damper	SJK150 Smooth Flow Backdraft Damper	MCA-500/150 Backdraft Damper	FC15 Fast Clamps	FGR150 Filter Units
MRJ-500/150 Inlet Grille	DJG150 Ceiling Grille	DUCT150-6M Flexible Duct	EC Controllers	CC015M Circular Attenuator
EPFL150 Fixed Louvre Grille