Products  Fans  By Mounting Type     Car Park Ventilation - Aviator Control System

Car Park Ventilation - Aviator Control System

Car Park Ventilation - Aviator Control System

Description

The Aviator Control System is a tailored solution, designed to efficiently manage car park ventilation equipment. It helps maintain good air quality when the car park traffic is high and conserve energy when it is low.

The Aviator Control System works in conjunction with the JetVent fans, CO and NOx pollutant sensors, variable speed drives, supply and exhaust fans and the BMS. The Aviator has been developed to help increase the energy efficiency of a car park, while ensuring the ventilation output is optimised. It will vary the operating speed of the car park fans according to when the requirements and demand in the environment develop.

When the CO or NOx pollutant levels within the car park reach a pre-set level, the ventilation fans begin to ramp up in speed. As the levels increase and decrease during the course of the day and night, the speed of the fans and therefore the ventilation rate also increase and decrease.

typical office carpark - car park ventilation

The Aviator Control System can also be connected to the fire system in the building to manage the automatic starting/stopping of the fans when a fire is detected (depending on fire/smoke management strategies), and control the fans at the FDCIE by manual speed control. Some buildings also require links from the Building Management System (BMS) to monitor the operation of the JetVent system in the car park.

Step 5 - Select the Aviator Control System

Selection Description Product Code
1   Select the controller Aviator Max DCV-CU-MAX1
Aviator Mini DCV-CU-MINI1
2   Select the BMS connection Via Modbus TCP or RTU N/A (std on controller)
Via BACnet MSTP or IP DCV-CPCO-LICENSE
3   Select the required sensors 4-20mA CO DCV-LPT-TCO
4-20mA NOx DCV-LPT-END
4-20mA Temperature DCV-RHP-3S11
Modbus RTU CO DCV-GSTC-C
Modbus RTU NOx DCV-GSTC-N
Modbus RTU Temperature DCV-CDTA-2N000
4   Select the required accessories Touchscreen 7” GUI DCV-CU-GUI7TS
Touchscreen 4.3” GUI DCV-CU-GUI
Expansion Module (Max Only) DCV-CU-EXPENSION1
Modbus Repeater DCV-CU-REPEATER1
Smoke Sensor JIEC-SMOKESENSOR
Smoke Ceiling Base Plate JIEC-SMOKEBASE

 

Control Systems

Elta Group